Bormed LE6609-PH
LDPE
北欧化工(Borealis AG)

产品描述
Bormed LE6609-PH is a resin intended for evaluation for use in Healthcare applications. Bormed LE6609-PH is an additive free low density polyethylene typically used in blow moulding articles . Material is characterised with a balanced inflexibility to facilitate to collapsibility of containers. Bottles and ampoules made from Bormed LE6609PH can be steam sterilised at temperatures above 110 °C. Products made from Bormed LE6609-PH can be sterilised by using ethylene oxide or radiation up to 35 kGy. Applications Bormed LE6609-PH has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed LE6609-PH . - Bottles for irrigation solutions - Ampoules for injectable solutions - Bottles for IV-solutions This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure. Special features - No additives

产品特性：医疗级，耐伽马射线，环氧乙烷灭菌(EtO)，耐蒸煮
成型方式：吹塑

香港鸿润创业国际有限公司,专注塑料20多年,原厂标准包装,LDPE 年销 2000吨,库存充足,品质保障,交货快捷!
欢迎来电咨询: 18816996168 (代先生),13538586433 (邓小姐)